Lowering the AUDI RS7 4K air suspension with KECODI | without additional module or connecting links up to 2022

Easily lower the factory-installed air suspension of your AUDI A7 / S7 / RS7 4K (up to 2022) yourself!

Pure software lowering according to the adjustable control limits set by AUDI!

No hardware upgrade is necessary!

It doesn't get any easier than this!

The lowering is done purely via "software" by adjusting the settings specified by the vehicle manufacturer and is completed in approximately 4 minutes!

You can also adjust the vehicle to a higher setting at any time (e.g., when you switch to winter tires, etc.).

The KECODI APP lowers the vehicle automatically; you only need to select the desired depth (= level)!

After a brief connection to the easily accessible OBD diagnostic port in the driver's footwell, the included KECODI coding interface, using the innovative and pre-configured KECODI app, automatically lowers the factory-installed and adjustable air suspension of your AUDI A7 4K C8 (up to 2022)!

Scope of delivery:

- 1x AUDI A7 4K air suspension lowering function with 10 selectable levels

- 1x KECODI coding interface (depending on selection)

- 1x KECODI storage box with warranty card (depending on selection)

- 1x Installation instructions (German)

Application time: approx. 4 minutes

Please note the following information before placing your order:

Lowering is possible on all AUDI A7 / S7 / RS7 4K models up to and including the beginning of model year 2023 with installed air suspension (= AAS, adaptive air suspension, e.g. PR number 1BK, 4-corner air suspension with electrically controlled damping) and every equipment variant (with / without all-wheel steering / rear-axle steering, etc.).

NOT suitable for AUDI A7 models without air suspension (= with steel springs such as PR number: 1BL, 1BA, 1BE).

You can easily identify an air suspension system by selecting drive select in the MMI. If you do NOT see an "Air Spring and Raise" menu item, then it is NOT an air suspension system but a "normal" suspension system which unfortunately cannot be adjusted via a diagnostic tool.

Audi electronically limits the ride height of its air suspension. With this "unlock dongle," you can adjust the height of your Audi A7 yourself in 10 (!!!) different increments.

In your KECODI app you can choose from 10 selectable levels, which have been tested and preset by us.

A maximum lowering of approximately minus 28mm is permitted, which corresponds to level 10.

Level 7 is the most commonly used lowering level, which corresponds to approximately minus 18mm.

The lowering is identical in all drive select modes. This means your AUDI A7 will be lowered by the same amount globally in all drive select driving modes (comfort / auto / dynamic).

The "raising" of the air suspension or the tire change mode will of course continue to work.

Important information:

The vehicle's ride height already changes depending on the drive select setting (comfort / auto / dynamic). While it is possible to adjust the ride height to the manufacturer's specified values, this cannot be officially registered for vehicles licensed in Germany or Austria.

For this reason, we offer this modification exclusively for show/exhibition/racing vehicles.

Please do not use this product on public roads - without TÜV approval - Not permitted under the German Road Traffic Regulations (StVO).